Yamaha MW12C 12 ch Mixer
With Yamaha's new MW Series USB Mixing Studio mixers, making great music is easier
than ever before.
Combined with the powerful Cubase AI4 audio/MIDI sequencing software, the new MW
series provides a comprehensive tabletop studio setup for the solo recording musician
and for the traveling producer/arranger.
Connect the new MW to a USB terminal on your laptop or desktop computer, and you've
got an instant, high-quality audio recording studio at your command.
The MW delivers true plug-and-play USB audio input/output interfacing-without the
need for special software drivers-and lets you easily record mono inputs or two-
track stereo mixes of multiple sources to your computer.
Flexible 12-Channel Configuration
The MW12C both give you a total of twelve inputs, including four mono microphone/line
inputs and four stereo line inputs.
Two of the stereo line inputs can also function as mono microphone inputs, providing
up to six simultaneous microphone inputs if you need them.
The high-performance ultra-low-noise balanced microphone inputs also have a phantom
power switch, allowing you to take advantage of the superior sonic quality of professional-level
condenser microphones.
Built-in SPX Effects
For those who like the convenience of having signal processing right inside the mixer,
the MW12CX incorporates a versatile digital multi-effect unit that provides a variety
of reverb, delay, modulation, and distortion programs you can use to enhance your
sound, or completely transform it-without the need for an external device.
Each of the 16 effect programs has a number of editable parameters as well as effect
on/off switching capability and return level control.
If you need to keep both hands free to play an instrument or perform other operations,
an optional footswitch can be connected to the mixer's effect footswitch jack for
convenient on/off switching.
Easy-to-use 1-Knob Compression
Compression-the taming of wildly varying levels in vocals, bass and guitar-is one
of the most important effects used in recording and mixing.
It is also one of the most subtle and difficult to use. Not with the new MW series
mixers, however.
The innovative 1-knob analog compressor (on the mono input channels) lets you dial
in just the amount of compression you need in recording, without having to set multiple
parameters like threshold, ratio and makeup gain.
One knob does it all for you-instantly giving you great, punchy sound.
Easy-access Panel and High-Quality Parts
Top-mounted input and output connectors make setting up and re-patching your system
quick and easy.
Both models feature high-quality Neutrik balanced XLR connectors for the microphone
inputs. Long-throw, smooth-action faders give you precise and tactile control over
signal levels.
The mixer also has a bright and large 12-segment LED meter for visual signal indication.
Channel On Switches
Dedicated On switches for each channel let you enable or disable (mute) individual
input channels as desired, while the lamps on the switches give you instant visual
indication about which channels are on.
Monitor Mix
This convenient feature gives you simple control over the balance between the signals
being recorded and the playback signals being monitored.
This is particularly helpful when recording several sources at the same time, letting
you use a single knob to adjust the balance of the playback and recording signals
for monitoring purposes.
Naturally, this doesn't affect the recording level; it simply allows you to control
what you want to hear.
Yamaha MW12c Features:
- Single USB connection, instant studio 12 inputs
- 6 ultra low noise mic preamps with quality Neutrik"! connectors
- Easy-to-use 1-knob compression
- Assignable (Rec Out) bus allows
- separate routing for monitoring and recording
- Monitor Mix allows simple 1-knob balance between
- record and playback signals
- Lighted Channel On switches for enable/mute function with visual indication
- Powerful Cubase AI software included
Yamaha MW12c Specifications:
Frequency Response
- ST OUT, REC OUT, AUX (EFFECT*) SEND, MONITOR OUT: -3.0, 0, 1.0 dB, GAIN: min(CH 1-2,
CH 3/4-5/6), 20Hz-20kHz, refer to the nominal output level @1kHz
- Total Harmonic Distortion (THD+N)
-
- ST OUT: Less Than 0.1 %, +14dBu, 20Hz-20kHz, Input Gain Control at minimum
- Hum and Noise
-
- CH INPUT 1-4 MIC: -128 dBu, EIN(Equivalent Input Noise): Rs=150 ohms, GAIN:max
- ST OUT, REC OUT: -88 dBu, ST,REC Master fader at nominal level and all Ch mix controls
at minimum.
- AUX (EFFECT*) SEND: -81 dBu, AUX Master control at nominal level and all Ch mix controls
at minimum.
- ST OUT, REC OUT: -64 dB, ST,REC Master fader and one Ch fader at nominal level.
- ST OUT: -98 dB, Residual Output Noise.
- Crosstalk@1 kHz
-
- Input to Output: -70 dB,STEREO L/R, CH 1-4, PAN panned Hard left or right.
- Phantom Voltage
-
- MIC: +48 V
- USB Audio I/O
-
- Sampling Frequency: 44.1, 48 kHz, Depend on the application of PC
- Input HPF
-
- CH 1-4, CH 5/6-7/8, 80Hz, 12dB/oct
- Input Equalization +15,-15dB maximum. Turn over/roll-off frequency of shelving:
- 3dB blow maximum variable level.
- High: 10 kHz shelving (CH 1-4, CH 5/6-7/8)
- Mid: 2.5 kHz peaking (CH 1-4, CH 5/6-7/8)
- Low: 100 Hz shelving (CH 1-4, CH 5/6-7/8)
- High: 10 kHz shelving (CH 9/10-11/12)
- Low: 100 Hz shelving (CH 9/10-11/12)
- PEAK Indicator
-
- Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping
(17dBu).
- LED Level Meter
-
- Pre MONITOR Level: 2x12 points LED meter (PEAK,+10,+6,+3,0,-3,-6,-10,-15,-20,-25,-30
dB)
- PEAK lights if the signal comes within 3 dB of the clipping level.
- Power Supply Adapter: PA-20
- Power Consumption: 30 W
- Dimensions (WxHxD): 346.2 x 86.1 x 436.6 mm
- Net Weight: 3 kg
- System Requirements for MW Series Mixers
-
-
- Windows Vista
-
- Computer: Windows-based computer with built-in USB interface
- OS: Windows Vista
-
- CPU: 1 GHz or better Intel Core / Pentium / Celeron processor
- Memory: More than 1 GB
- Windows XP
-
- Computer: Windows-based computer with built-in USB interface
- OS: Windows XP Professional / XP Home Edition
- CPU: 750 MHz or better Intel Core / Pentium / Celeron processor
- Memory: More than 128 MB
- Macintosh
-
- Computer: Macintosh computer with built-in USB interface
- OS: Mac OS X 10.3.3 or higher
- CPU: Macintosh G3 processor 300 MHz or better
- Memory: More than 128 MB
- Cubase AI4 System Requirements
- Windows
-
- OS: Windows XP Professional / XP Home Edition
- CPU: Intel Pentium 1.4 GHz or better
- Available Memory: More than 512 MB
- Hard Disk : Free disk space of 400 MB or more; high-speed hard disk
- Audio Interface: Windows DirectX / ASIO compatible
- Macintosh
-
- OS: Mac OS X 10.4 or higher
- CPU: Power Mac G4 1 GHz or Core Solo 1.5 GHz or better
- Available Memory: More than 512 MB
- Hard Disk: Free disk space of 400 MB or more; high-speed hard disk
|